Original USA caterpillar 980L 8 tons front end wheel loader
Cat Wheel Loader 980L1. Benefits & Specifications:RELIABILITY
- Cat® C13 ACERT™ engine offers increased power.
- Utilizing rigorous component design and machine validation processes results in unmatched reliability, durability and high uptime.
DURABILITY
- Heavy-duty powershift transmission and axles handle extreme applications.
- Improved hydraulic hose routing reduces potential hose wear.
- Full flow hydraulic filtration system with additional loop filtration improves hydraulic system robustness and component life.
PRODUCTIVITY
- Engine power increased by approximately 5% improves machine performance and response (compared to H Series).
- Lock-up clutch torque converter, combined with lock-to-lock shifting, delivers smooth shifts, fast acceleration and speed on grade.
- High capacity torque converter results in greater digging efficiency.
- Z-bar linkage provides high breakout force at ground level.
- Optional high lift linkage offers increased hinge pin height to load more easily in a variety of applications.
- Easy-to-load Performance Series Buckets feature a wider mouth and curved side plates that improve material retention (fill factor) and decrease cycle times.
- Optional limited slip differentials improve performance in the pile and poor underfoot conditions.
- Optional Aggregate Handler configuration offers slightly higher payload capability for loose aggregate rehandling.*
*Optional configurations and equipment may vary from region to region and requires conformance to Caterpillar payload policy. Consult your dealer or Caterpillar representative for details.
FUEL EFFICIENCY
- Up to 25% lower fuel consumption than H Series.**
- Power dense ACERT engine burns less fuel by providing power and torque when needed.
- Performance Series Buckets feature a longer floor that easily digs through the pile resulting in lower fuel consumption.
- Load sensing hydraulics result in proportional flow for implement and steering on demand.
- Standard productive Economy Mode provides maximum fuel savings with minimal productivity impact.
**Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.
EASE OF OPERATION
- New best-in-class operator environment provides unmatched comfort, visibility, and efficiency.
- Intuitive, ergonomic controls keep operators focused on their work.
- Optional new ride control system with dual accumulators provides excellent ride quality and lowers cab vibrations.
SAFETY
- Excellent cab access with wide door and stair-like steps.
- Floor to ceiling windshield, large mirrors with integrated spot mirrors and rear vision camera provide industry leading all-around visibility.
- Robust, repositioned grab bars provide safe access to the machine.
SERVICEABILITY
- One-piece tilting hood with side and rear doors; hydraulic and electrical service centers make access fast and easy.
- Safe, ground level access to fuel fill and daily maintenance points means less servicing time is required.
- Optional, fully integrated Cat Autolube system provides full lube system monitoring and diagnostic test visibility.
CAT CONNECT TECHNOLOGY
- Monitor, manage and enhance job site operations.
- Cat LINK Technologies: VisionLink® enables owners to access data wirelessly to monitor machine health, utilization and location.
- Cat DETECT Technologies: Integrated rear vision camera enhances visibility behind machine to help operators work safely. Optional Cat Rear Object Detection increases operator awareness of the working environment which enhances site safety.
- Cat PAYLOAD Technologies: Optional Cat Production Measurement 2.0 brings simple and accurate on-the-go payload scale allowing operators to deliver exact loads and work more efficiently. Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.
2. Specifications:ENGINE
Net Power - ISO 9249 | 278.0 kW |
Engine Model | Cat C13 ACERT |
Displacement | 12.5 l |
Maximum Power - 1,800 rpm - ISO 14396 - Metric | 303.0 kW |
Maximum Net Power - 1,800 rpm - ISO 9249 - Metric | 278.0 kW |
Maximum Net Torque - 1,000 rpm | 2040.0 N·m |
Peak Gross Torque - 1,300 rpm - ISO 14396 | 2172.0 N·m |
SERVICE REFILL CAPACITIES
Cooling System | 45.0 l |
Crankcase | 37.0 l |
Transmission | 77.0 l |
Hydraulic Tank | 153.0 l |
Differential - Final Drives - Front | 84.0 l |
Differential - Final Drives - Rear | 84.0 l |
Fuel Tank | 426.0 l |
SOUND
Note (1) | *Distance of 15 m, moving forward in second gear ratio. |
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** | 72.0 dB(A) |
Note (2) | **For machines in countries that adopt the ?EU Directives.? |
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** | 109 LWA*** |
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) | 75.0 dB(A) |
Note (3) | ***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.? |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) | 112.0 dB(A) |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) | 78 dB(A)* |
WEIGHTS
Operating Weight | 30090.0 kg |
Note | Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open differential axles (front/rear), secondary steering, sound suppression, an |
BUCKETS
Bucket Capacities | 4.2-12.2 m? (5.5-16.0 yd3) |
TRANSMISSION
Forward - 1 | 6.9 km/h |
Forward - 2 | 13.3 km/h |
Forward - 3 | 23.5 km/h |
Forward - 4 | 39.5 km/h |
Reverse - 1 | 7.8 km/h |
Reverse - 2 | 15.2 km/h |
Reverse - 3 | 26.9 km/h |
Reverse - 4 | 39.5 km/h |
Note | Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm roll radius. |
OPERATING SPECIFICATIONS
Breakout Force | 224.0 kN |
Static Tipping Load - Full 37° Turn - No Tire Deflection | 20796.0 kg |
Static Tipping Load - Full 37° Turn - With Tire Deflection | 19565.0 kg |
Note (1) | For a machine configuration as defined under ?Weight.? |
Note (2) | Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
HYDRAULIC SYSTEM
Implement Pump Type | Variable Displacement Piston |
Implement System - Maximum Operating Pressure | 34300.0 kPa |
Implement System - Maximum Pump Output at 2,250 rpm | 449.0 l/min |
Hydraulic Cycle Time - Total | 10.1 s |
BUCKET CAPACITIES
Bucket Range | 4.2-12.2 m? (5.5-16.0 yd3) |
DIMENSIONS - HIGH LIFT
Centerline of Rear Axle to Edge of Counterweight | 2608.0 mm |
Centerline of Rear Axle to Hitch | 1900.0 mm |
Ground Clearance | 453.0 mm |
Height - Top of Exhaust Pipe | 3746.0 mm |
Height - Top of Hood | 3110.0 mm |
Height - Top of ROPS | 3813.0 mm |
Hinge Pin Height at Carry | 678.0 mm |
Hinge Pin Height at Maximum Lift | 4760.0 mm |
Lift Arm Clearance at Maximum Lift | 4010.0 mm |
Maximum Width over Tires | 3296.0 mm |
Note | All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires. |
Overall Length - Without Bucket | 8302.0 mm |
Rack Back - Carry Height | 48 degrees |
Rack Back - Maximum Lift | 61 degrees |
Rack Back at Ground | 39 degrees |
Tread Width | 2440.0 mm |
Wheel Base | 3800.0 mm |
DIMENSIONS - STANDARD LIFT
Centerline of Rear Axle to Edge of Counterweight | 2608.0 mm |
Centerline of Rear Axle to Hitch | 1900.0 mm |
Ground Clearance | 453.0 mm |
Height - Top of Exhaust Pipe | 3746.0 mm |
Height - Top of Hood | 3110.0 mm |
Height - Top of ROPS | 3813.0 mm |
Hinge Pin Height at Carry | 621.0 mm |
Hinge Pin Height at Maximum Lift | 4539.0 mm |
Lift Arm Clearance at Maximum Lift | 3795.0 mm |
Maximum Width over Tires | 3296.0 mm |
Note | All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires. |
Overall Length - Without Bucket | 8214.0 mm |
Rack Back - Carry Height | 48 degrees |
Rack Back - Maximum Lift | 61 degrees |
Rack Back at Ground | 40 degrees |
Tread Width | 2440.0 mm |
Wheel Base | 3800.0 mm |
KNOW MORE ABOUT US ------------------------------------------------------------------------------------------------------------------Our company do win-win business with good exporting business reputation which provide used /second hand construction mahcinery, for instance used wheel loaders,used excavators, used motor graders , used bulldozers ,road rollers ,mixer trucks ,dump trucks ,cranes ,forklifts ,tractor trucks ,and pump trucks . The above is the hot sale line for global market with the following advantage .
1>Original parts and good working condition;
2>Low working hours and well-test service for machinery
3>Strong engine power .
4>Complete accessory and no oil leaking;
5>Competitive price ,price is negotiatable to some degree .
6>Good After-sales Service!
WELCOME U CONTACT US AND VISIT US TO INSPECT MACHINERY ,WE CAN OFFER THE PRE-SALE RESEPTION SERVICES .,
1) Pick you up at airport;
2) Reservate hotel for you;
3) Guide u visit the tourist points in shanghai when u are free after finish business .
BUSINESS LINE Used Truck Crane1. KATO: NK250E, NK350E, NK400E-3, NK500E, NK550E
2. TADANO: TL250E, TL300E, TG500E, TG550E, TG650E
Used Crawler Crane1. HITACHI KH125 35T, KH180 50T, KH700 150T
2. KOBELCO 7045 50T, 5100 100T, 7150 150T
3. SUMITOMO LS118 50T, LS238 100T, LS248 100T
Used Excavator1. Used hitachi excavator: EX100WD, EX120, EX200-1, EX200-2, EX200-3, EX200-5, EX350, ZAXIS200, ZAXIS230
2. KOMATSU PC60, PC120, PC130-7, PC200, PC210, PC220
3. CAT CAT312B, CAT320B, CAT320C, CAT325B, CAT330B, CAT 330C
4. HYUNDAI, DAEWOO, KEBOLCO, SIMITOMO, etc
Used Wheel Loader1. KOMATSU WA300, WA350, WA360, WA380, WA400, WA470
2. CAT CAT936E, CAT950B, CAT950F, CAT966D, CAT 966E, CAT966F
3. KAWASAKI KLD65Z, KLD70, KLD70B, KLD80, KLD85, KLD85Z
4. TCM TCM230, TCM870,TCM75B
Used Bulldozer1. CATERPILLAR D6D, D6H, D7H, D7G, D8 K, D8N, D9L
2. KOMATSU D75A-1, D85A-18, D85A-21, D155-1, D155-2, D355, D375
Used Motor Grader1. CAT 12G, 120G, 14G, 140H
2. KOMATSU GD511A, GD605R, GD623A
Road roller1. DYNAPAC CA25, CA30 (weight: 8T-14T)
2. BOMAG BW213D-2, BW217D-2, BW219D-2
TRUCK DUMP TRUCK :ISUZU ,MITSUBISHI ,NISSAN-UD ,HOWO
MIXER TRUCK :ISUZU ,NISSAN-UD ,HINO ,FUSO ,MITSUBISHI
PUMP TRUCK :PUTZMEISTER ,SANY ,ZOOMLINE
Customer visit
Contacts:Mr Jason Zeng